Pumps and Motors

  • Hello, We have a borewell in Hassan, Karnataka. It is 497 feet deep with 6" diameter having casing till 20 feet. Please suggest 1. The capacity of motor required ? 2. Is a single phase motor available for a borewell of this depth? 3. Which is a better motor - single phase or 3 phase ?
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello, We have dug a borewell of 200 feet depth & inserted 5 inch pipe upto 120 feet. Water is available at 30 feet. Please suggest a suitable pump.
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello, I have a borewell which is 350 feet deep with a 6" diameter with an yield of 2". The casing depth is 10 feet. Please suggest a suitable submersible motor & pump for the same. Sunil Sarnobat
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hi, I have a borewell that was assured of 4" water at 300 feet total depth. I get the water for an hour and then it stops. So I stopped using it. However when I lift the pipes and pump, I hear the sound of flowing water down somewhere in the bore well. It is really like the noise of a pouring w...
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello, I want to know what is the best time of the day to run the borewell at home to get maximum pressure, please help me
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello, Our borewell is 380 feet deep. We have purchased a 5HP pump with a head of 75 meter and discharge of 210 lpm. Please suggest if this is sufficient?
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello,If we suck the groundwater from borewell, what happen to the empty space? Does it get filled with air? If the pump is placed inside the borewell, is the water sucked from water level above the pump or the water level below the pump.
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello, I have a borewell which is about 300 ft deep. I would like to know whether a submersible motor or compressor motor, which is preferable for household purpose.
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello, I have a 4 Inch borewell with water at 60 ft. The total land area is 1 hectare for irrigation. I will be requiring a maximum of 40000 ltr per hour water as I am going to install drip irrigation system in my farm. Can you suggest an appropriate submersible pump which can work for me effi...
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hi, I have recently dug a bore well and have got water on 675 feet. I need assistance in deciding the capacity of the motor I need to use. Some suggestions have been that I should use a 3HP, 40 Stages, 3-Phase motor. Is this correct? Kindly suggest.
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hi,I have constructed 75000 L underground RCC water tank. The tank depth is 12 feet. I want to install a mono-block pump inside the house. The distance of the pump from the water tank is 100 Feet. I want to fill up an overhead tank of 1000L capacity which is located at a height of 30 feet....
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello,I have a borewell which is 412ft deep having a 8" dia. We were using a 12 stage, 5 HP pump, 2" HDPE pipe and best quality power cable and were able to get good water. A few days ago I installed a 7.5 hp pump which was recommended by most of the people to maximise use but after 30 minutes ...
    Anonymous (not verified)posted 5 years 10 months agoread more
  • Hello,I have a borewell which is 430ft deep. My motor and pipes are stuck in the borewell at 200ft. I need contacts of people who can help me remove this in Prakasham District in Andhra Pradesh. Please help. My contact number is 8142389085
    Anonymous (not verified)posted 5 years 10 months agoread more
  • HelloOur borewell is 840 ft deep but we got water at 780 ft. We have installed Texmo submersible motor. It runs for few seconds and the meter reads at 12-15 amps but there is no water. I get the message on display 'dry'. Someone was saying that I should have got some water at least after monsoon re-...
    Anonymous (not verified)posted 5 years 11 months agoread more
  •  Hello,My borewell is 600 feet deep, with 20 feet casing. It has 6" dia. I want to use this for agricultural purposes. Can anyone guide me as to how I should calculate the required capacity (hp) of the submersible pump for this borewell? What are the factors to be considered? 
    Anonymous (not verified)posted 5 years 11 months agoread more
  • Hello,We have a borwell from last 3 years at our farm in Khajuraho ( Madhyapradesh)  installed with 5 HP submersible motor at 150 ft. It has 2inch HDPE delivery hose. Six months ago the pump stopped working. We removed it, got it repaired and installed it again at 120 ft. Now again it has stopp...
    Anonymous (not verified)posted 5 years 11 months agoread more
  • Hi,We have a borewell with a motor at 500ft depth. During rainy season, there was a little seepage of muddy water and the motor stopped functioning. When we checked with a borewell person he told that borewell motor is stuck with mud and cannot be pulled out. So we had a pipe blasting and pulle...
    Anonymous (not verified)posted 5 years 11 months agoread more
  • Hello,My submersible pump is stuck in the borewell at 190 feet. I am not able to remove it. Roots of trees may have entangled at 40 feet depth. Kindly suggest how I can remove the pump.
    Anonymous (not verified)posted 5 years 11 months agoread more
  • Hello,We are using a  2.5 hp air compressor for water supply from a borewell of 270 ft depth, since the water table is not sufficient enough for using a submergible pump. Can you please tell us which grade of oil is to be used for such compressors as lubricant?  Since it is a loc...
    Anonymous (not verified)posted 5 years 11 months agoread more
  • Hi,We had got a borewell dug in 2010 which was giving good water since then. Few weeks ago we got little muddy water. Now when we are switching on motor the MCB reading is 15 amps (used to get water at 15amps, 200v earlier) with no water. After a while it drops to 13 amp again with no water. Th...
    Anonymous (not verified)posted 5 years 12 months agoread more

Pages

Solar pumps are cost-effective, environment-friendly and have good potential in places with high water table. Sehgal Foundation, that piloted 14 solar pumps in two districts of Bihar, shows how.

Irrigation system in India is often about big dams and hundreds of kilometres of canals that incur huge capital expenditure. Hence, policies at the central and the state level are mostly tilted in favour of big projects and often neglect micro-level solutions.

Attachments

Topics

Sub-Categories

Regions

I don't have an electricity connection yet. Can any one suggest a good diesel motor which can lift water from 120 feet deep borewell. Any other ideas also invited.

Thanks & Regards,

Ranjith

Topics

Sub-Categories

Regions

I have a bore well which is 730 feet deep and since there is lot of slush, I get it cleaned once in two years. I have two 20 feet metal casing pipes installed. This time the lorry person while removing the rod, some how pulled the bottom casing pipe and it crumbled and got stuck at 18 feet. The lorry person said that he could do anything, and he wouldn't even be able to re-bore through the metal. How can I get this casing removed and install a new one? I'm with out water for almost 3 days.

Topics

Sub-Categories

Regions

A study from Telangana finds faulty power subsidy policies of the state and the resultant increase in tube wells with electric pumps as reasons for depleting groundwater levels.

According to the data released by the Food and Agricultural Organisation’s AQUASTAT in 2010, at 250 billion m³ per year, India is one of the countries that uses groundwater the most. As high as 80 percent of its water is used for irrigation of which 65 percent is groundwater.

Attachments

Topics

Sub-Categories

Regions

I have to lift water 120 feet horizontally distance and vertically distance 30 feet, where as my motor pump capacity is 127 feet (39 meter). Can it work as per my requirement?

Thanks, Deepak

Topics

Sub-Categories

Regions

I have an underground storage at my which is storing water recd from the pipeline of Municipal Corporation. I have installed electric motor for lifting water from the underground storage to overhead tank in my terrace. One morning I switched on the motor for lifting water and forgot to switch off the motor which kept on running for 3-4 hrs and the storage was empty long before. Suddenly I realized and switched off the motor. After few hours when i switched on the motor, it was running but water was not being lifted . What could be the problem ?

Topics

Sub-Categories

Regions

The holy city of Ujjain is dealing with severe water and sanitation issues. A study reveals serious anomalies in the WASH situation in the city.

Despite all the hype around Swachh Bharat Mission, the situation on the ground remains dismal. The city of Ujjain is located on the western part of Madhya Pradesh on the Malwa Plateau and is primarily a religious tourism centre due to the Mahakal temple. The temple is not only one of the 12 jyotirlingas in India but also has prominence as the location for the Simhastha Kumbh Mela every 12 years.

Attachments

Topics

Sub-Categories

Regions

Dear Iwp
I live by the seaside where the water table is very high and there is copious water. I do not have government supplied water and depend solely on my well for my domestic use.  But because  the water is shrinking in my regular well which is about 25 feet deep, I have dug a borewell of about 50 feet as a safety measure. The borewell had a jet pump which got damaged and needs to be replaced.

Topics

Sub-Categories

Regions

December 14, 2016 9:30AM

Topics

Sub-Categories

Regions

Hi

I need to know the proper requirement of submersible motor and pump stage for 3 inches delivery pipe at the depth of 500 ft bore well.

Regards

Jaya Prakash

Topics

Sub-Categories

Regions

Pages

Subscribe to RSS - Pumps and Motors