Groundwater

Pages

ACWADAM

Organizers

Advanced Center for Water Resources Development and Management (ACWADAM), supported by Arghyam

Venue

Pune (Details on the exact venue will be updated soon)

Duration

January 13, 2013 9:00AM - January 27, 2013 5:15PM

Topics

Sub-Categories

Regions

Dear Sir/Madam,

Is it a good practice to lift water from 400ft borwell daily to a overhead tank which is placed above 3 floors(45 feet from ground level).

Thanks
Ravi

Topics

Sub-Categories

Regions

I have drilled a borewell for domestic use. The casing is 40 feet and the depth of the borewell is 60 feet. The soil below casing is white and I want to know who conducts the yield test of a borewell in Wai, Satara district before putting a new borewell pump?

 

Topics

Sub-Categories

Regions

Please send price details to drill borewell

Topics

Sub-Categories

Regions

How can the water availablitly in an area where there is no piped water supply and is dependent on borewell, water tankers, and handpumps be improved. The area lies in the Pipliyan Piande Kahn, Bhopal. Thes suggestions would be very helpful for our use in our design project (L.A.P) for the existing conditions of the village.

Topics

Sub-Categories

Regions

Dear Sir,

The municpal water connection we have is often very muddy and we have to clean the sump very often. I would like to know if there is a filtering method/device to clean the water before it enters the sump.Thank you, awaiting your reply.

Topics

Sub-Categories

Regions

Dear Sir,
We were using a borewell for past oneyear, its depth is 500ft. Last week the water yield suddnely stopped from the borewell. We asked plumber to examine, he told that the pump was stuck at the bottom of the borewell, that means at 430 ft level beacuse of silt coverage.

We tried using chain pulleys to lift the motor, and we tried flushing it 3 times, to remove the silt, finally we were that the silt was at around 200ft which has covered our borewell fully. Is there any solution to remove the silt and motor from the borewell.

Topics

Sub-Categories

Regions

What would be the rates of 6",8", and 10" dia MS casing pipe used in borewells?

Topics

Sub-Categories

Regions

Dear Sir,

We have a Project " raw water pumping from river for an industry" , which includes the design of intake, Jack well, pumping main. Though an exclusive Water Treatment Plant (WTP) is being planned within the industry premises, which also includes sedimentation before filtration, the client desires a per-sedimentation before pumping from Jackwell. The purpose is to reduce the cleaning of the silt etc., Would like to know if this is practiced anywhere else, if not, can you please give any documentary references. Thank You.

Topics

Sub-Categories

Regions

Sir / Madam,

I am looking for water purifier for my house. I stay in apartment & use borewell water, I am unable to decide on the product since they are confusing me, the current TDS (tank water) is 301 , that was checked by sales executive & he suggested me to the best should be below 60. Some say RO system is not good it will kill good bacteria, etc. some say UV is fine. Please suggest me how to decide the best water purifier.

Topics

Sub-Categories

Regions

Pages

Subscribe to RSS - Groundwater