We dug a borewell at our house in A.S.Rao Nagar for our newly constructed house in Hyderabad, depth upto 320ft with details as below:

@ 30ft Rock (30 ft casing pipe)
@ 290ft first source of water struck
@ 320ft stopped water pressure was too much that bit of the bore was not going so technician suggested to stop the bore
@ Submersible was installed till 290 ft and 30 ft is vacant

The submersible  pump was working well for over one month when a sudden drop in pressure over a week stopped the water flow. Use of the pump without water resulted in the coils being burned out. The pump was replaced but there is no yield from the well.

I would like to know how to proceed further in order to revive the bore. It is not possible to go drill further as the bore is located in a corner of the plot and later periods of construction have rendered the area non accessible to the truck.

Sunil Kumar B
aries.sunil@gmail.com