We have a farm land in Jawad, Dist. Neemuch, Madhya Pradesh, Pin-458330. My question is related to scarcity of water in our well. We have a 87 feet deep well and a borewell with depth
630 feet. At the depth of 75 feet, there is a horizontal connection joining the well and the borewell. The distance between the well and the borewell is also approximately 75 feet.

When the borewell was dug, water was found at the depth of 97 feet (about 1 and 1/2 inch). This is due to a current of water at that depth. Now we would like to dig the well deeper (about 110 feet) so that we can capture this flow of water found on the borewell.

My question is: is there any way to find out if we dig the well deeper, we will get this current of water?

The composition of the earth in our farm land is the following: up to some depth, there is black and yellow sand, then there is concrete and finally there is lime stone. So, below the depth of 30-35 feet, there is limestone.

If there can be any way of finding the source and location of under ground water kindly let me know. I am also willing to talk to any one if you can provide the contact details.

Vishwambhar Rathi
vrathi@gmail.com