Standard Method for Testing Microbiological Safety of Drinking Water

Published on
Standard Method for Testing Microbiological Safety of Drinking Water
Background
Objective
Methodology
  1. First sterilize all the 15 tubes in hot, boiling water.
  2. After cooling, add –
  3. 1. 5 ml of water to 5 tubes of double strength medium
  4. 2. 1 ml of water to 5 tubes of single strength medium
  5. 3. 0.1 ml of water to 5 tubes of single strength medium
  6. Keep all the 15 tubes in the incubator for 48 hours and at a temperature of 35-37’C. If you do not have an incubator a closed chamber with a light bulb and thermometer can be a poor substitute. Periodic manual checking of temperature along with switching off / on of the bulb will be needed.
  7. Now look for some change of colour and gas produced in the tubes.
  8. Plot the number of tubes, which has changed colour and match it with Mc Crady table given below. This table gives you the number of bacteria present in 100 ml of water.
  9. Incubate the tubes showing colour sub culture in fresh medium at a temperature of 44’C.
  10. The positive result is then matched in the same table, which shows thermo tolerant bacteria in 100 ml of water.
  1. Piped and treated (urban)water supply:   No coliforms and E. coli in 100 ml of water
  2. Untreated water entering the system:  E. coli – nil / 100 ml, Coliforms – 3/100 ml
  3. Rural unpiped supply: E. coli – nil / 100 ml, Coliforms 10 / 100 ml

Note

Measurement of the number of coliform bacteria per 100 ml is often used as an important criterion in determining the degree of pollution and the sanitary quality of a simple of water. The allowable number limit per 100 ml of surface water sample is less than 100 organisms. The absence of E. Coli in drinking water is an absolute indispensability.

Further Activity

The presence of faecal coliform bacteria in sources other than drinking water can also pose health hazards. For instance, when irrigating crops with faecal coliform contaminated water (such as wastewater), chances are high that disease may spread after consumption of the grains and vegetables grown with such water. Crops that are eaten uncooked are especially dangerous for the transmission of such diseases. One method for controlling the
spread of such bacterial diseases is by delaying the consumption of the crop, as bacteria dissipates and perishes once exposed to air.

Think….

  • Think of some new and innovative solutions to kill faecal coliform bacteria and the disease causing bacteria found in irrigation/municipal water.
  • Is there any quick and easy method of killing the bacteria source in the vegetables you buy before you put it on the table?
  • Do you think disinfectant chemicals such as chloride can effectively kill the bacteria without disturbing the balance of the aquatic environment? Show your teacher with the help of some experiment the possible negative or positive results of using disinfectants to kill bacteria.
  • Imagine yourself the head municipal authority in your village or town. Now think of the measures that you would be taking to stem or control microbiological pollution of water sources in your locality? Make a list of all possible activities / regulations / enforcements that you can think of.


Reference
Standard methods for the examination of water and wastewater, 17th edn. American Public Health Association, Washington DC.

Source: Harness water resources for a better future - Activity Guide for the 13th National Children's Science Congress 

India Water Portal
www.indiawaterportal.org